Installation and trial operation of Dry Powder Magnetic Separator

Installation and trial operation of Dry Powder Magnetic Separator

The Pry Powder Magnetic Separator is widely used in medicine, chemical industry and food industry. It is suitable for magnetic separation of ceramics, glass, Refractory and other non-metallic minerals. The operation of Magnetic Separator requires related personnel to be familiar with composition and structure of the equipment, to understand the relevant operating procedures and maintenace work. For the first use of Magnetic Separator, need to be first installed and trial run points for attention are as follows:

1. The Dry Powder  Magnetic Separators shall be installed on the horizontal concrete foundation and fixed by anchor bolts.

2. When installing the equipment, pay attention to the vertical and horizontal of the main body.

3. After the installation of the equipment, check whether the bolt is loose and the door of the main engine is fastened. If so, please tighten it and do  the related adjustment.

4. Configure power cord and control switch according to power of equipment.

5. After the installation and inspection of the Magnetic Separator is completed to observe whether the trial operation is normal and make relevant adjustment according to the situation.

6. The Dry Powder Magnetic Separator can not be put into use until it is in normal trial operation.

On the installation and commissioning of Magnetic Separator matters needing attention for you so much, we hope to help you. The standard operation and maintenance of the Magnetic Separator can extend the service life of the equipment. More details of the equipment are welcome to leave a message.